Operation Guide

14-20
Machine Settings
Settings Menu
Setting Item Description Applicable Page
2. X DIMENSION Specifies the horizontal size of the custom paper.
(05.00–14.00" (127–356 mm))
e-Manual
“Printer Settings
from the Machine”
3. Y DIMENSION Specifies the vertical size of the custom paper.
(03.00–08.50" (76–216 mm))
8. APPEND CR TO LF Sets whether to append a carriage return (CR) when line feed
code (LF) is received.
NO The print head moves down to the next line when line feed
code is received, and the margin does not change (such as the
beginning of the next line).
YES The print head moves to the beginning of the next line when
line feed code is received.
9. ENLARGE A4 Sets whether to expand the printable area of A4 size paper to
that of Letter size in width.
* This setting is applicable for A4 paper and portrait
orientation for the PCL5 printing only. The PCL6 printing is
not supported.
OFF All the area on a page 1/8" (4.23 mm) from the top, bottom, left,
and right edges is available for printing on A4 paper.
ON All the area on a page 1/8" (4.23 mm) from the top and bottom
edges and 1/8" (3.30 mm) from the left and right edges is
available for printing on A4 paper. Only the width increases.
10. BarDIMM*
2
Sets whether to use the bar code printing function.
ENABLE Sets the bar code printing function to on.
FreeScape: ~, ", #, $, /, \, ?, {, }, |, OFF
DISABLE Sets the bar code printing function to off.
11. RESET PRINTER Clears all print jobs in progress and resets the printer function.
OFF
ON
–
–
*
1
Only for users of the PCL Printer Kit.
*
2
This setting is available only if the bar code printing function is activated.
TIMER SETTINGS
TIMER SETTINGS
Setting Item Description Applicable Page
1. DATE&TIME SETTING Sets the current date and time. p. 5-4
2. TIME ZONE SETTING Sets the time zone of your machine’s location. e-Manual
“Introduction of the
Machine”
3. DATE TYPE SELECT Sets the date format.
MM/DD/YYYY
DD/MM YYYY
YYYY MM/DD
–
–
–