Operation Guide

14-27
Machine Settings
Settings Menu
Setting Item Description Applicable Page
2. RAW 0–65535 (default:9100) e-Manual
“Network Settings”
3. HTTP 0–65535 (default:80)
4. SMTP RX 0–65535 (default:25)
5. POP3 RX 0–65535 (default:110)
6. FTP SENDING 0–65535 (default:21)
7. SMTP TX 0–65535 (default:25)
8. SNMP 0–65535 (default:161)
14. SET IP ADD RANGE Sets whether to restrict the range of IP addresses.
OFF Disables restriction of IP address of computers.
ON Enables restriction of IP address of computers from which data
(print/fax jobs) can be sent to the machine.
1. PERMIT/REJECT Selects whether to permit or reject access from a specified IP
address.
REJECT
PERMIT
–
–
2. SET IP ADDRESS Specifies the IP address range. <START IP ADDRESS> and <END
IP ADDRESS> must be entered for each setting.
1. IP ADDRESS 1
2. IP ADDRESS 2
3. IP ADDRESS 3
4. IP ADDRESS 4
–
–
–
–
15. RX MAC ADD SET. Sets whether to activate a MAC address filter.
OFF Disables a MAC address filter.
ON Specifies a MAC address filter to access. A MAC address must be
entered for each setting.
1. PERMIT RX ADD1
2. PERMIT RX ADD2
3. PERMIT RX ADD3
4. PERMIT RX ADD4
5. PERMIT RX ADD5
–
–
–
–
–
2. SMB SETTINGS*
2
Sets the SMB settings to use the machine on a NetBIOS
network.
1. USE SMB CLIENT Sets if SMB client is used.
OFF SMB client is not used.
ON SMB client is used.
1. SERVER Enters the NetBIOS name of the machine.
2. WORKGROUP Enters the name of the workgroup the machine belongs to.
3. COMMENT Enters a comment about the printer.
4. LM
ANNOUNCE
Sets if the machine notifies the LAN Manager of its existence.
OFF
ON
–
–
3. SNMP SETTINGS Sets detailed information about SNMP.