Operation Guide

Before Using the Machine
1-9
Display Parts and Functions
Display Parts and Functions
Depending on your needs, you can change the standby display which appears when the
main power switch is turned on. For details, see “Settings Menu,” on p. 14-4.
Log in mode is displayed only when <MANAGE DEPT. ID> or <MANAGE USER ID> is set to <ON> in <SYSTEM SETTINGS>. For
details on the system settings, see “Security,” in the e-Manual.
Copy Mode
Copy Mode
Without optional paper drawer
01
ATEXT
100% LTR
With optional paper drawer
01
ATEXT
100% AUTO
① Zoom ratio
② Paper size
③ Quantity
④ Image quality
⑤ Density
Send Mode (imageRUNNER 1025iF
Send Mode (imageRUNNER 1025iF
only)
only)
FAX
SELECT SEND METHOD
●
●
Scan Mode
Scan Mode
SCANNING MODE
Log In Mode
Log In Mode
If the Department ID Management or User ID
Management is set, the Log In screen is displayed.
For information on the Department ID Management
or User ID Management, see “Security,” in the e-
Manual.
For Department ID Management
ENTER DEPT.ID
Enter the Department ID and password, then press
[OK].
For User ID Management
ENTER USER ID
Enter the User ID and password, then press [OK].
Make sure to press [Log In/Out] after using the machine
when the Department ID/User ID Management is set.
When the main power switch is turned on, the message
<INITIALIZING...> is shown until the standby display appears.
●
●
–
–