User Manual

14-11
Machine Settings
Settings Menu
Setting Item Description Applicable Page
3. AUTO REDIAL Sets whether to redial automatically when the other line is busy
or a transmission error occurs.
p. 5-46
ON Customizes the redial operation.
1. REDIAL TIMES Sets the number of retries. (1TIMES–10TIMES)
2. REDIAL
INTERVAL
Sets period of time before redialing. (2MIN.–99MIN.)
3. TX ERROR
REDIAL
Sets whether the machine redials automatically when
transmission error occurs.
ON
OFF
–
–
OFF After the first attempt at dialing fails, redialing is not
attempted.
4. TIME OUT Sets whether to scan a document automatically after specifying
the destination.
(This function is not available when you dial with
– [numeric keys].)
OFF
ON
–
–
–
5. DIALING LINE CHCK Sets whether to check the telephone line condition.
OFF
ON
–
–
p. 5-48
3. RX SETTINGS Sets the reception features. p. 5-55
1. ECM RX Sets whether the ECM (Error Correction Mode) reception is
activated.
ON
OFF
–
–
2. RX MODE Selects the receive mode.
FaxOnly
FaxTel
AnsMode
DRPD
Manual
–
–
–
–
–
p. 5-11
3. FAX/TEL OPT. SET Sets the optional items in the <FaxTel> mode. p. 5-55
1. RING START TIME Sets the time the machine takes to check whether a call is a fax
or a voice call. (0SEC–30SEC)
2. F/T RING TIME Selects the ring length for voice calls. (15SEC–300SEC)
3. F/T SWITCH ACTION Selects whether the machine switches to the receive mode
after the ring time has elapsed, or whether if disconnects the
call.
RECEIVE
DISCONNECT
–
–