User Manual

14-22
Machine Settings
Settings Menu
Setting Item Description Applicable Page
6. SPECIAL MODE N When the two-sided printing function is used, paper may curl
severely or become jammed. Enable this setting to prevent
paper curling or jamming.
OFF
ON
–
–
e-Manual
“Maintenance”
7. SPECIAL MODE P Sets to activate when lightweight paper or paper which is easy
to get uneven print density is used for printing.
OFF
ON
–
–
8. SPECIAL MODE S Sets whether to reduce the waiting time for the next printout.
When you change the paper size after continuous printing, the
machine may take a while to start the next printing.
OFF Does not reduce the waiting time next set of printout. (default)
SPEED PRIORITY Reduces the waiting time to start the next set of printout.
Print speed has priority; however, it is possible that a previously
printed image may be printed faintly on the next output.
9. CONT. PRINT MODE Sets whether to prevent the back edge of the previous page
from appearing on the following page during continuous
printing of half-tone prints or photographs.
OFF
ON
–
–
10. BACK EDGE MODE Sets whether to prevent back edge of paper from smudging.
OFF
ON
–
–
11. LARGE PAPER MODE Sets whether to improve toner fix on large size paper.
OFF
ON
–
–
12. AUTO ADF DRTY ADJ*
1
Sets whether to activate smudge (due to dust or dirt) reduction
during printing.
When the ADF is dirty, copies may contain unwanted dots or
lines.
ON
OFF
–
–
13. MAINTENANCE CODE This setting is not functional in this model.
*
1
Not applicable for imageRUNNER1025.
REPORT SETTINGS
REPORT SETTINGS
Setting Item Description Applicable Page
1. SETTINGS*
1
Sets the report functions. p. 5-66
1. TX REPORT Sets whether the transmission report prints out.
PRINT ERROR ONLY Prints a report only when a transmission error occurs.