User Manual

14-28
Machine Settings
Settings Menu
Setting Item Description Applicable Page
1. USE SNMP Sets whether to activate SNMP.
ON
OFF
–
–
e-Manual
“Network Settings”
2. COMMUNITY NAME
1
Sets SNMP community name 1 (default: public).
3. COMMUNITY NAME
2
Sets SNMP community name 2.
4. SNMP WRITABLE 1 Enables computers on the network to access the machine and
modify its settings.
ON
OFF
–
–
5. SNMP WRITABLE 2 Enables computers on the network to access the machine and
modify its settings.
OFF
ON
–
–
4. DEDICATED PORT Sets or browses detailed information on the machine with a
Canon printer driver or utility.
ON
OFF
–
–
5. ETHERNET DRIVER Specifies the type of network connection.
1. AUTO DETECT Selects the detection method of Ethernet driver.
AUTO Sets the machine to determine the communication mode (Half
duplex/Full duplex) and Ethernet type (10Base-T/100Base-TX)
automatically.
MANUAL Sets the communication mode and Ethernet type manually.
1. DUPLEX Selects the communication mode.
HALF DUPLEX
FULL DUPLEX
–
–
2. ETHERNET TYPE Selects the Ethernet type.
10 BASE-T
100 BASE-TX
–
–
6. VIEW IP ADDRESS Checks the current network settings.
1. IP ADDRESS Checks the IP address.
2. SUBNET MASK Checks the subnet mask.
3. GATEWAY ADDRESS Checks the gateway address.
7. E-MAIL/I-FAX*
2
1. SMTP RX Sets whether to receive e-mail/l-faxes using the machine’s own
SMTP receiving function.
OFF
ON
–
–
2. SMTP SERVER Registers the host name of the machine with the DNS server.