User Manual

Originals and Print Media
2-2
Originals Requirements
Originals Requirements
Available original type, size, weight and quantity are shown in the table below.
Platen Glass ADF
Type Plain paper
Thick originals
Photographs
Small originals (e.g., index cards)
Special types of paper (e.g., tracing
paper*
1
, transparencies*
1
, etc.)
Books (Depth: 7/8" (20 mm)
maximum)
–
–
–
–
–
–
Plain paper (Multiple pages of originals of the
same size, thickness and weight or one-page
originals.)
Size (W × L) 8 1/2" × 14" maximum
(216 × 356 mm maximum)
8 1/2" × 14" maximum (216 × 356 mm
maximum)
5 1/2" × 5" minimum (139.7 × 128 mm
minimum)
Weight 4.4 lb (2 kg) maximum One-sided scanning (1 page): 13 to 34 lb bond
(50 to 128 g/m
2
)
Two-sided scanning: 13 to 28 lb bond (50 to
105 g/m
2
)
Quantity 1 sheet 50 sheets
maximum*
2
(25 sheets maximum for LGL originals)
*
1
When copying transparent originals such as tracing paper or transparencies, use a piece of plain white paper to cover the
original after placing it face-down on the platen glass.
*
2
21 lb bond (80 g/m
2
) paper
Do not place the originals on the platen glass or in the ADF until the glue, ink or correction fluid on the
originals are completely dry.
Remove all fasteners (staples, paper clips, etc.) before loading the originals in the ADF.
To prevent original jams in the feeder, do not use any of the following:
Wrinkled or creased paper
Carbon paper or carbon-backed paper
Curled or rolled paper
Coated paper
Torn paper
Onion skin or thin paper
Paper printed with a thermal transfer printer
Transparencies
●
●
●
•
•
•
•
•
•
•
•