User Manual

Registering Destinations in the Address Book (imageRUNNER 1025iF Only)
3-8
Storing/Editing One-Touch Keys
8
Con rm that <HOST NAME> is displayed,
then press [OK].
2.HOST NAME
1-TOUCH SPD DIAL
9
Enter the name of the  le server on the
network (120 characters maximum) using
– [numeric keys], then press [OK].
If no DNS server is available, the host name
setting should be speci ed using the IP address
of the FTP server.
server1
HOST NAME :1
Ex.
10
10
Con rm that <FILE PATH> is displayed,
then press [OK].
3.FILE PATH
1-TOUCH SPD DIAL
11
11
Enter the  le path to the folder to which
the job is to be sent (120 characters
maximum) using – [numeric keys],
then press [OK].
server1/home/share
FILE PATH :a
Ex.
12
12
Con rm that <LOGIN NAME> is displayed,
then press [OK].
4.LOGIN NAME
1-TOUCH SPD DIAL
13
13
Enter the login name using
– [numeric keys], then press [OK].
canon
LOGIN NAME :a
Ex.
You can enter up to 24 characters for the login
name.
14
14
Con rm that <PASSWORD> is displayed,
then press [OK].
5.PASSWORD
1-TOUCH SPD DIAL
15
15
Enter the password using – [numeric
keys], then press [OK].
123XXXX
PASSWORD :a
Ex.
You can enter up to 24 characters (14 characters
when <SMB> is selected as the server protocol)
for the password.
To register another one-touch key, repeat the
procedure from step 4.
16
16
Press [Stop] to return to the standby
mode.