User Manual

Registering Destinations in the Address Book (imageRUNNER 1025iF Only)
3-14
Storing/Editing Coded Dial Codes
Storing/Editing Coded Dial Codes
Registering Fax Numbers in Coded Dial Codes
Registering Fax Numbers in Coded Dial Codes
This section describes the procedure for registering fax numbers in the coded dial codes.
1
Press [Additional Functions].
2
Press [ ] or [ ] to select <ADDRESS
BOOK SET.>, then press [OK].
4.ADDRESS BOOK SET.
ADD. FUNCTIONS
If a password has been set for the Address Book,
enter the password using
– [numeric keys],
then press [OK].
3
Press [ ] or [ ] to select <CODED
SPD DIAL>, then press [OK].
3.CODED SPD DIAL
ADDRESS BOOK SET.
4
Press [ ] or [ ] to select a coded dial
code (000 to 176) for which you want to
register the fax number, then press [OK].
[*000]NOT REGISTERED
CODED SPD DIAL
You can also select a coded dial code by
pressing
[Coded Dial] followed by the
desired three digit code.
5
Con rm that <FAX> is displayed, then
press [OK].
FAX
CODED SPD DIAL
6
Con rm that <NAME> is displayed, then
press [OK].
1.NAME
CODED SPD DIAL
7
Enter the destination name (16 letters
maximum, including spaces) using
– [numeric keys], then press [OK].
John(FAX)
NAME :a
Ex.
8
Con rm that <TEL NUMBER ENTRY> is
displayed, then press [OK].
2.TEL NUMBER ENTRY
CODED SPD DIAL
9
Enter the fax number you register (120
digits maximum, including spaces and
pauses) using – [numeric keys], then
press [OK].
012XXXXXXX
TEL NUMBER ENTRY
Ex.
10
10
Con rm that <OPTIONAL SETTING> is
displayed, then press [OK].
3.OPTIONAL SETTING
CODED SPD DIAL