User Manual

Registering Destinations in the Address Book (imageRUNNER 1025iF Only)
3-15
Storing/Editing Coded Dial Codes
11
11
Press [ ] or [ ] to select <ON>, then
press [OK].
ON
OPTIONAL SETTING
12
12
Con rm that <ECM> is displayed, then
press [OK].
1.ECM
OPTIONAL SETTING
13
13
Press [ ] or [ ] to select <ON> to
reduce system and line errors while
sending to or receiving from other
machines that support ECM, then press
[OK].
ON
ECM
14
14
Con rm that <TX SPEED> is displayed,
then press [OK].
2.TX SPEED
OPTIONAL SETTING
15
15
Press [ ] or [ ] to select the sending
speed (33600 bps, 14400 bps, 9600 bps,
or 4800 bps), then press [OK].
33600bps
TX SPEED
If transmission errors occur frequently, lower the
speed.
16
16
Con rm that <INTERNATIONAL> is
displayed, then press [OK].
3.INTERNATIONAL
OPTIONAL SETTING
17
17
Press [ ] or [ ] to select the most
e ective transmission option, then press
[OK].
DOMESTIC
INTERNATIONAL
<DOMESTIC>: Normally select this option.
<LONG DISTANCE 1-3>: Select one of these
options when you make an international call.
If errors occur during fax transmissions, try the
setting from <LONG DISTANCE 1> through
<LONG DISTANCE 3>.
To register another coded dial code repeat
the procedure from step 4.
18
18
Press [Stop] to return to the standby
mode.
–
–
–