Owner's Manual

MetaConsole Client for Canon Devices 11
SMB Settings
(This section might not be displayed.)
Enable SMB Select this check box to enable SMB, or clear it to disable
SMB.
Domain/Workgroup Type the name of the SMB domain or workgroup.
Scope ID Type the SMB scope ID.
SMB Server Name Type the SMB server name.
Enable LM Announce Select this check box to enable LM Announce, or clear it
to disable LM Announce.
Name Server Settings
Enable WINS Resolution Select this check box to enable WINS resolution, or clear
it to disable WINS resolution.
WINS Server Type the name or IP address of the primary WINS
server.
Node Type Click in the list to select the node type.
Print Applications
(This section might not be displayed.)
Enable LPD Select this check box to enable LPD, or clear it to disable
LPD.
3. Click Apply.
Managing IPX Properties
The IPX properties that are displayed can differ depending on the device model.
To display and change IPX-related properties for a device:
1. In the navigation pane, expand the device’s node and the Networking node, and click
IPX.
2. In the details pane, change the following settings as desired:
Enabled Frame Type(s)
Select or clear check boxes to enable or disable frame types, or in the Mode list,
click the frame type to enable . (Selection method depends on device model.)
Print Application
(This section might not be displayed.)
Mode Click in the list to select a print application.
NDS
Tree Name Type the name of the PServer’s tree.
Context Type the name of the PServer’s context.
PServer Type the PServer’s name.
Password Type the PServer password.