Getting Started FT6-1101 (000)
Contents Installation Requirements.................................................................................................. 3 About the Supplied Manuals............................................................................................ 3 Navigating the Menu and Text Input Method............................................................ 4 Turning ON/OFF the Power...............................................................................................
Installation Requirements About the Supplied Manuals Getting Started (This manual): 4" (100 mm) or more 18" (457 mm) Read this manual first. This manual describes the basic machine settings, operations, and cautions. Be sure to read this manual before using the machine. 12 7/8" (327 mm) 10 1/2" 20 1/2" (265 mm) (520 mm) Driver installation manuals (Included with the drivers): Read these manuals next. These manuals describe software installation.
Navigating the Menu and Text Input Method Turning ON/OFF the Power ON Back ▲▼◀▶OK Numeric keys # Clear Menu Navigating the Menu Item selection or moving the cursor among the menu items Select an item with [▲] or [▼]. Proceed to the next hierarchy with or [▶]. Return to the previous hierarchy with (Back) or [◀]. OFF Setting confirmation Press . However, when appears on the display, select , and then press . Text Input Method Changing entry mode Press to change the entry mode.
Choosing the Method to Connect the Machine to the Computer ●● Connecting via a LAN Setting Up the LAN Connection 1 Connect the LAN cable. You can connect the machine to the computer through a wired LAN router. Use a LAN cable to connect the machine to the router. The IP address will be automatically configured in 2 minutes. If you want to set the IP address manually, see the following items. ake sure that there are ports available on the router to connect M the machine and the computer.
Setting a Paper Size and Type Follow the instructions on the screen to set the paper size and type. Perform Useful Tasks A variety of functions are available. An overview of some useful functions is provided below. Print Enlarged/Reduced Printing 2-Sided Printing Reduced Layout You can reduce multiple documents to print them onto one sheet.
Clearing Paper Jams If the following screen appears, a paper jam has occurred inside the machine. Follow the procedure displayed on the screen to remove the jammed paper. This manual indicates only areas where paper jams occur. For details on the procedures, see the e-Manual.
Replacing Toner Cartridge Toner cartridges are consumables. When the toner becomes nearly empty or has run out completely in the middle of a job run, a message appears on the screen, or the following problems may occur. Take the appropriate action accordingly. When a Message Appears When the toner becomes nearly empty or has run out in the middle of a job run, a message appears on the screen.
Symbols Used in This Manual WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the machine safely, always pay attention to these warnings. CAUTION Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the machine safely, always pay attention to these cautions. IMPORTANT Indicates operational requirements and restrictions.
Handling Maintenance and Inspections WARNING • Immediately unplug the power plug from the AC power outlet and contact an authorized Canon dealer if the machine makes an unusual noise, emits an unusual smell, or emits smoke or excessive heat. Continued use may result in a fire or electrical shock. • Do not disassemble or modify this machine. There are high-voltage and high-temperature components inside the machine which may result in a fire or electrical shock.
Legal Notices Product Name Safety regulations require the product’s name to be registered. In some regions where this product is sold, the following name(s) in parenthesis may be registered instead.
Laser Safety This product complies with 21 CFR Chapter 1 Subchapter J as a Class I laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. Also, this product is certified as a Class 1 laser product under IEC60825-1: 2007. This means that the product does not produce hazardous laser radiation.
CANON imageRUNNER 1435P LIMITED WARRANTY Canon U.S.A., Inc. or Canon Canada Inc. (as applicable, "Canon") warrants the imageRUNNER 1435P product and Canon brand options designed for use with the imageRUNNER product (collectively the "Product") to be free from defects in workmanship and materials under normal use and service for a period of 90 days after delivery to the original purchaser ("Purchaser") or 100,000 prints or copies (or a combination of both), whichever comes first.
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Park, Melville, NY 11747, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands (See http://www.canon-europe.com/ for details on your regional dealer) CANON AUSTRALIA PTY LTD Building A, The Park Estate, 5 Talavera Road, Macquarie Park, NSW 2113, Australia CANON CHINA CO. LTD. 15F Jinbao Building No.