Getting Started Guide

08 Install the Drum Unit 09
Remove the cover attached to the drum
insertion slot.
The removed cover is not used later on.
06
Remove the drum unit from its protective
bag.
07
Do not touch or expose the cylindrical, blue-green part to
light for a long time, as the print quality may deteriorate.
Do not expose the drum unit to direct sunlight or strong
light.
Condensation (water droplets on the inside or outside)
may form on the drum unit when it is brought into an
environment with a sudden change in temperature or
humidity.
When moving a new drum unit to a location with change
in temperature, leave the drum unit in the protective bag
at the new location for two or more hours to allow it to
adjust to the new temperature.
Turn the drum unit lock lever
counterclockwise as far as it will go.
05
Drum Unit Lock Lever