Copying Guide

Different Size Originals

3-22

Special Copying Features

Different Size Originals

This mode enables you to copy different size originals together in one group, as

long as they have one side with an equal length (i.e., LTR and 11" x 17" ). Just

make sure that the sides of the originals with the same length be lined up when you

place them in the feeder and the machine will automatically select the appropriate

paper size and copy ratio for each original.

In order to use the Different Size Originals mode, you need to assign this function to

a Shortcut key in the Additional Functions menu before making copies. (See "Using

Shortcut Keys," on p. 4-16.)

IMPORTANT

If the machine is operating in the Different Size Originals mode, you cannot use the

Two-Page Separation, Frame Erase, or Image Combination modes.

All originals placed together in the feeder must be the same weight (paper type).

NOTE

You can use the stack bypass for the Automatic Paper Selection when:

- The paper is loaded in the stack bypass

- The paper size has been speciﬁed in 06 USE STACK BYPASS in COMMON

SETTINGS from the Additional Functions menu

- Automatic Paper Selection is set to '02 ON' for the stack bypass in the DRAWER

ELIGIBLTY menu

Press [COPY].

lights, and the Copy Basic Features screen appears.

Place your originals in the feeder ➞ press the Shortcut key

([1] to [4]) where you registered the Different Size Originals

mode.

The screen displays [DIF SIZE DOC] on the upper left corner.

COPY

Reduce

Enlarge

Two Page Separation

Frame Erase