Reference Guide

Paper Drawers
6-2
Routine Maintenance
6
Paper Drawers
This section describes how to load paper into the paper drawers.
NOTE
The following paper sizes can be loaded into the paper drawers: 11" x 17" , LGL , LTR
, LTR , and STMT .
For details of available paper stock which can be loaded into the paper drawers, see
"Paper Type," on p. 2-22.
Loading Paper
If the selected paper has run out, or the selected paper drawer runs out of paper
during printing, a screen prompting you to load paper appears on the display, and
the alarm indicator blinks red.
CAUTION
When loading paper, take care not to cut your hands on the edges of the paper.
IMPORTANT
The message also appears if the selected paper drawer is not fully inserted into the
machine. Once you properly insert the paper drawer, the message will disappear.
NOTE
If the above message appears during printing, the remaining prints are automatically
made after you load the correct paper.
To cancel printing, press (Stop). (See Chapter 1, "Introduction to Copying," in the
Copying Guide .)