Reference Guide

Main Power and Energy Saver Key
1-16
Before You Start Using This Machine
1
3 The screen below is displayed while the system software is
loading.
The machine is ready to print about 30 seconds (at a room temperature of 68˚F
(20˚C).) after the screen above appears.
The screen below is displayed when the machine is ready to scan.
IMPORTANT
If you turn OFF the main power, wait for at least 10 seconds before turning the
main power back ON.
NOTE
The standard settings are selected at power ON.
The standard copy settings are:
You can change the standard copy settings. (See Chapter 4, "Customizing
Settings," in the Copying Guide.)
You can select which function to display on the Basic Features screen, according to
the Additional Function settings. (See "Initial Function at Power ON," on p. 3-8.)
You can reserve a job when the display above appears. (See Chapter 1,
"Introduction to Copying," in the Copying Guide.)
Copy Ratio: Direct (100%)
Paper Selection:Auto Paper Selection
Copy Exposure: 5
Copy Quantity: 1