Reference Guide

Making Prints Using the Stack Bypass
2-17
Basic Operations
2
IMPORTANT
Do not print on the underside of the envelopes (the side with the flap).
If the envelopes become filled with air, flatten them by hand before loading them
into the stack bypass.
Take particular care to spread the envelopes out in the direction they will be fed.
❑ Load the envelopes, as shown below.
IMPORTANT
Depending on the paper type or condition of the envelopes, the printing quality may
deteriorate or a paper jam may occur. In such a case, it is recommended to change
the type of envelopes.
If you are printing data from a personal computer, always load the envelopes, as
shown above.
4 Press [F3] (▼) or [F4] (▲) to select the paper size ➞ press
[OK].
Flap
F3
F4
OK