Reference Guide

Making Prints Using the Stack Bypass

2-18

Basic Operations

● If you want to use envelopes:

❑ Press [F3] (▼) or [F4] (▲) to highlight <15 ENVELOPE> ➞ press [OK].

The display for specifying envelope type appears.

❑ Press [F3] (▼) or [F4] (▲) to highlight <01 COM10>, <02 Monarch>, or <03

DL> ➞ press [OK].

IMPORTANT

Set the paper size to the same size as the paper loaded in the stack bypass.

NOTE

The above display appears unless the paper size is set in the USE STACK

BYPASS menu. (See "Standard Paper for the Stack Bypass," on p. 3-16.)

● To change the paper type:

❑ Press [F2] (SELECT PAPER) ➞ press [F3] (▼) or [F4] (▲) to select the paper

type ➞ press [OK].

IMPORTANT

Select the paper type before selecting the paper size.

Select the correct paper type to avoid a paper jam.

The paper type is invalid if you select 'ENVELOPE' for the paper size.