Reference Guide

Making Prints Using the Stack Bypass
2-19
Basic Operations
2
5 Place your originals, and set the copy mode.
6 Press [Start].
Copying starts.
NOTE
If you are printing on heavyweight paper or envelopes using the stack bypass, and
find that the paper or envelopes are not being fed smoothly or evenly through the
stack bypass, curl the forward edge in the print direction of the paper or envelopes
upward by approximately 1/8" (3 mm) so that the rollers can grip the paper as it is
fed into the stack bypass, then reload the paper or envelopes.
To cancel all settings and restore the machine's standard settings, press
(Reset).
Start