Reference Guide

Specifying Common Settings

3-16

Selecting and Storing Settings

● To make the stack bypass or paper drawer ineligible for APS/ADS:

❑ Select <01 OFF>.

Repeat the procedure from step 3 to continue APS/ADS settings.

NOTE

If you select <02 ON> for the stack bypass, press (▼) or (▲) to select

the paper size to be used on the stack bypass ➞ press (OK).

Press [Reset] to return to the Basic Features screen.

Standard Paper for the Stack Bypass

This mode enables you to set the standard paper size for the stack bypass, if you

always use the same size paper. This way you do not need to select the paper size

each time you use the stack bypass.

IMPORTANT

If you set the standard paper size for the stack bypass, you cannot select the paper size

when you use the stack bypass.

NOTE

The default setting is '01 OFF'.

Press [Additional Functions] ➞ press [F3] (▼) or [F4] (▲) to

highlight <01 COMMON SETTINGS> ➞ press [OK].

The COMMON SETTINGS menu appears.

F3 F4

Reset

Additional Functions