Operation Guide

33
Easy Operation Guide Send/Fax
34
Send and Fax Functions Easy Operation Guide
Copy PrefaceOther
Print
Scan
Send/Fax
1
Press [Delayed Send].
2
Enter the time to send the
document using
–
(numeric keys) → press [OK].
3
Press [Done].
1
Press [Stamp].
2
Press [Done].
Press [Send Settings].
You can specify the time for sending the document. This function is useful, for example, when you want to send a
document at a future time when you may not be near the machine.
Specifying the Time to Start Sending
Press [Send Settings].
You can set the machine to ax a stamp on the front side of scanned originals to indicate they have been scanned.
† The Stamp mode is available only when the optional Stamp Unit-B1 is attached
to the feeder (optional for the imageRUNNER 2530/2525/2520).
Axing Stamps on Scanned Originals
󱌮
󱌮
>> Send and Fax Functions
This section describes the operation procedures for the Send
and Fax functions you can access from the [Send Settings]
button on the top screen of the Send and Fax functions.
1
Press [▼].
2
Press [Reply-to].
3
Select the reply-to address →
press [OK] → [Done].
First, register the e-mail address you want to use as the reply-to
address.
Press [Send Settings].
You can specify the reply-to address for your e-mails/I-faxes.
Adding the Reply Destination to Sent Documents
󱌮
Chapter 2❖Sending and Facsimile Guide
Chapter 2❖Sending and Facsimile Guide
Chapter 3❖Sending and Facsimile Guide
󱌮