Guide for Mac

Using the Faxmonitor

4-30

Special Fax Driver Options

Printer Menu

The following commands are available on the [Printer] menu of the Faxmonitor.

NOTE

•

After changing the printer configuration, for example by adding an optional fax board,

make sure that you select [Get Printer Information] from the [Printer] menu, or click

[Printer Info] or [Device Settings], in the [Print] dialog box accessed from the application

software in which you created a document, to configure the fax settings. Failing to follow

this procedure may result in unacceptable printout.

•

To monitor the printer status using the Faxmonitor, you need to register the printers with

the Printer Setup Utility (for Mac OS X 10.3 or later) or the Print Center (for Mac OS X

10.2.8). Then, select the printers in the [Print] dialog box accessed from application

software in which you created documents.

•

Depending on the printer model you are using, [Get Printer Information] may not be

available when connected via USB.

[Printer Name]:

Displays the printers whose status you can monitor. If more than

one is available, select the printer whose status you want to

monitor.

[Search for Printer]:

If the printer you want is not displayed on the [Printer] menu, it

can be searched by selecting [Search for Printer].

[Get Printer Information]: Displays the [Printer Info] dialog box.

[Make Default]:

Registers the currently selected printer the next time the

Faxmonitor starts.