User`s guide

Setting Specifications That Are Common to Each Function (Common Settings)
3-16
3
Customizing Settings
3 Select [On] or [Off] for the stack bypass and each paper
drawer ➞ press [OK].
[On]: Makes the paper drawer eligible for APS/ADS.
[Off]: Makes the paper drawer ineligible for APS/ADS.
The number of each paper drawer is indicated in the following places:
The selected mode is set.
NOTE
• You cannot select ‘Off’ for any paper source other than the stack bypass.
• If you selected [Copy], in step 2, you can select whether the machine considers the
paper type loaded in a paper drawer.
- If [Consider Paper Type] is set to ‘On’, the paper is not fed even when it runs out
during printing, unless another paper drawer is loaded with the same paper size
and type. For details on stored paper types, see “Identifying the Type of Paper in a
Paper Drawer,” on p. 3-17.
- If you set [Consider Paper Type] to ‘Off’, the paper will be fed from another paper
drawer when it runs out during printing, if the same paper size is loaded in that
paper drawer.
• The Stack Bypass Symbol ( ) is not displayed when [Printer] is selected.
Stack Bypass
Paper Drawer 1
Paper Drawer 2
Paper Drawer 3
Paper Drawer 4