User`s guide

Setting Specifications That Are Common to Each Function (Common Settings)
3-20
3
Customizing Settings
2 Press [▼] or [▲] until [Energy Saver Mode] appears ➞ press
[Energy Saver Mode].
3 Select [–10%], [–25%], [–50%], or [None] ➞ press [OK].
The approximate energy saving figures for each mode, and the approximate
delay times from power ON to Ready to Print status are listed below.
• –10%: 10% less power (approximately 50 seconds)
• –25%: 25% less power (approximately 90 seconds)
• –50%: 50% less power (approximately 180 seconds)
• None: 2% less power (approximately 0 seconds)
• The figures in parentheses ( ) show the approximate time it takes for the
machine to return to the Ready to Print status.
The selected mode is set.
4 Press [Done] repeatedly until the Basic Features screen
appears.