User`s guide

Setting Specifications That Are Common to Each Function (Common Settings)
3-31
3
Customizing Settings
● If [Transparent Image] is selected:
❑ Adjust the halftone density by pressing [–] or [+] ➞ press [Next].
You can enter a value from 20% to 99% (in one percent increments).
Even when you enter the values using - (numeric keys), you can change
the values by pressing [–] or [+].
6 Set the scanning mode.
If you want to change the scanning ratio, press [Copy Ratio]. (See Chapter 1,
“Basic Copying,” in the Copying Guide or Chapter 2, “Scanning Originals into an
Inbox,” in the Mail Box Guide.)
If you want to change the scanning exposure, press [ ] or [ ]. (See Chapter 1,
“Basic Copying,” in the Copying Guide or Chapter 2, “Scanning Originals into an
Inbox,” in the Mail Box Guide.)
If you want to select the image quality for scanning, select the type of original
from the image quality drop down list. (See Chapter 1, “Basic Copying,” in the
Copying Guide or Chapter 2, “Scanning Originals into an Inbox,” in the Mail Box
Guide.)
If you want to set the Nega/Posi and Sharpness modes, press [Special Features]
➞ set each function. (See Chapter 2, “Additional Copy Functions,” in the
Copying Guide or Chapter 2, “Scanning Originals into an Inbox,” in the Mail Box
Guide.)
0
9