User`s guide

Setting the Timer (Timer Settings)
3-55
3
Customizing Settings
2 Press [–] or [+] to enter the desired Auto Clear Time ➞ press
[OK].
The Auto Clear Time settings are from 0 to 9 minutes (in one minute increments).
You can also enter values using - (numeric keys).
The selected mode is set.
3 Press [Done] repeatedly until the Basic Features screen
appears.
Setting the Time for the Unit to Quiet Down after the Last
Task
This machine enters the Quiet mode after a specified amount of time has elapsed
following a print job, or after a key has been pressed. You can specify the amount of
time that elapses prior to entering the Quiet mode.
NOTE
• If ‘0’ is selected, the Quiet mode is not set.
• The default setting is ‘1 minute’.
0
9