User`s guide

Report Settings
3-68
Customizing Settings
3
Report Settings
This section describes how to print various reports.
NOTE
• [Report Settings] is displayed only if the optional Network Kit or Network Multi-PDL
Printer Kit is attached.
• [Send] is only displayed if you are using the imageRUNNER 6020i/5020i.
Specifying Report Settings
You can specify whether to print a Send Result Report after every Send job, only
after an error occurs, or not at all. You can also specify whether an Activity Report is
printed after every 100 documents have been sent or received, or at specific times.
IMPORTANT
You cannot specify the Report Settings for MEAP applications.
Send Result Report (TX Report)
The default setting is to print a report when an error occurs. However, you can
select to print a Send Result Report after every send job, print a portion of the sent
document, or select not to print a Send Result Report.
NOTE
The default settings are:
- Send Result Report: ‘For Error Only’
- Error Copy Print: ‘On’