User`s guide

Specifying the Communications Settings (Communications Settings)

4-34

System Manager Settings

Set the Maximum Data Size For Sending.

❑ Press [Maximum Data Size For Sending].

❑ Press [–] or [+] to specify the maximum data size for sending.

You can set the Maximum Data Size for Sending from 0 to 99 MB in 1 MB

increments.

You can also use - (numeric keys) to enter values, and (Clear) to clear

your entries.

IMPORTANT

The maximum data size for sending must not be greater than the maximum data

size of the mail server. Contact your System Administrator for details.

NOTE

•

If you enter ‘0 MB’ as the data size, there is no size limit on the data that is sent.

You can send messages without limiting the data size.

•

The data size limit can be set in 1 MB increments. If the size of an e-mail message

exceeds the set limit, the e-mail message is split up by page and sent out as

smaller e-mail messages, each of which is within the set limit. I-fax data that

exceeds the set limit is handled as an error, and is not sent.