User`s guide

Setting MEAP Settings (MEAP Settings)
4-95
System Manager Settings
4
Printing Installed Applications’ Information (Print System
Information)
You can print the information of the MEAP applications and certain system
applications.
NOTE
• This mode can be used only if the optional Network Multi-PDL Printer Kit is installed.
• The information is printed as a print job of the printer driver. You can check the details of
the job by pressing [System Monitor]. (See “Checking Job Details,” on p. 2-8.)
• The following attributes are set to the jobs when printing.
- Job Name: “MEAP SYSTEM INFORMATION” is always set.
- Job Client: The login name of the user who operates Additional Functions is set.
However, this is activated only if you enter from MEAP authentication.
- Client Job ID: ‘0’ is always set to the field of the application ID.
- Document Format: [Supported Document Format] is obtained using CPCA. If PCL
exists in the Supported Document Format, PCL is set. If PCL does not exist, ESC/P is
set.
1 Press (Additional Functions) ➞ [System Settings].
If the System Manager ID and Password have already been set, enter the System
Manager ID and System Password using
- (numeric keys) ➞ press (ID).
2 Press [▼] or [▲] until [MEAP Settings] appears ➞ press
[MEAP Settings].
3 Press [Print System Information].
0
9
ID