User`s guide

LDAP Server Settings

4-100

System Manager Settings

IMPORTANT

If <Login Information> is set to ‘Use (security auth.)’ for the LDAP server and

Reverse DNS Lookup (a function that looks up the host name from the IP address)

is not supported, enter a host name and not an IP address.

NOTE

You can enter up to 48 characters for the server’s address.

Press [Location to Start Search].

If the server’s LDAP version is 3, then you do not have to specify [Location to

Start Search]. (If the LDAP version is 3, the machine can automatically retrieve

settings from the server, and sets the location to start searching.) If the server’s

LDAP version is 2, you have to specify [Location to Start Search].

Enter the location to start searching ➞ press [OK].