User`s guide

Adding Toner
5-13
Routine Maintenance
5
IMPORTANT
• The screen prompting you to add toner is displayed until you press [Recover Later/Done].
• Use only the toner bottle recommended for use with this machine.
• Never add more than one bottle of toner.
• Add toner after the <Add toner.> message is displayed.
NOTE
• When the <Add toner.> message appears, approximately 300 prints can still be made
(LTR-size Canon Standard Chart). However, since this number may vary depending
upon the original being copied, it is recommended that the toner be added as soon as
possible.
• You can check how to add toner by pressing [Previous] or [Next] on the screen.
• If the toner runs out during a print job, the remaining prints are made after you add toner.
1 Open the toner supply cover.
2 Hold the toner bottle with both hands, as shown in the
illustration, and turn it up and down a few times, to evenly
distribute the toner inside the bottle.