User`s guide

List of Error Messages
6-36
Troubleshooting
6
Remove the original from the platen glass.
Cause : The original remains on the platen glass.
Remedy : Remove the original from the platen glass, and place the next document for
copying.
Remove the original from the feeder.
Cause : The original is placed both in the feeder and on the platen glass. The specified
mode, which is programmed, requires the original placed on the platen glass
only.
Remedy : Remove the original from the feeder.
Out of resources. Wait for a moment, then perform operation again.
Cause : You cannot browse the network, because the network is congested as a result
of continuous sending or heavy use of FTP or Windows (SMB).
Remedy : Wait a moment, and browse again.
Set the IP Address.
Cause : The IP address of the main machine has not been set.
Remedy : Set the IP address in Additional Functions and turn the main power back ON.
No response from the server. Check the settings.
Cause : The setting of the specified server is not correct or the server’s power has not
been turned on.
Otherwise, resources may be insufficient.
Remedy : Wait for a while and try connecting again. If you cannot connect, select another
server.
NetWare is in use. Wait for a moment, then perform operation again.
Cause : You cannot browse the network, as NetWare printing uses PServer or NDS
PServer.
Remedy : Browse again after NetWare printing is complete.