User`s guide

What This Machine Can Do
1-9
1
Before You Start Using This Machine
What This Machine Can Do
Most operations for using this machine are done from the touch panel display. By
pressing the keys following the messages on the touch panel display, you can
utilize the functions of this machine.
IMPORTANT
The Send function is only available on the imageRUNNER 6020i/5020i.
Switching the Functions Indicated on the Touch Panel
Display
After the power is turned ON, the following screen appears on the touch panel
display. You can press [Copy], [Send], [Mail Box], [Scan], or [System Monitor] to
change functions. (See “Selecting the Initial Function at Power ON,” on p. 3-8.)
To display other functions, such as a MEAP application if it is installed, press [➞].
IMPORTANT
[Scan] is displayed when the Network Scan feature is installed.
NOTE
• [Send] is only displayed on the imageRUNNER 6020i/5020i.
• You can set the initial screen (the first screen shown when the machine is turned ON)
from the Additional Functions screen. The initial screen can be the Copy, Send, Mail Box,
MEAP, or System Monitor screen.
• If you press [➞] right after the machine is activated, the screen will not be changed. Wait
for a moment, then press [➞] again.