User`s guide

List of Error Messages
6-42
Troubleshooting
6
#806
Cause : Incorrect user name or password was specified when sending to the file server.
An incorrect destination was specified when sending e-mail/I-Fax.
Remedy : Change the user name or password of the destination.
Check the destination of the e-mail/I-Fax.
#807
Cause : You do not have the permission to access the specified directory.
Remedy : Set the authority required to access the server’s directory, then send again to
the accessible server.
#808
Cause : An error occurred on the server while sending data to a file server.
Remedy : Reboot the server or perform other maintenance techniques as necessary.
#809
Cause : A same file name exists on the server and cannot be overwritten.
Remedy : Change the settings on the file server to enable overwriting.
#810
Cause : A POP server connection error occurred when receiving an I-Fax. The POP
server returned an error during connection. A timeout error occurred on the
server side during connection to the POP server.
Remedy : Check the POP server name setting in Additional Functions. Confirm that the
POP server is operating correctly. Check the network status.
#815
Cause : Attempted to log on to a file server that has already been logged on by you. You
cannot log on to the same device with the same user name.
Remedy : Wait a few moments to send the data again; change the NetWare server to
send, or stop the PServer.
#816
Cause : Unavailable to print because the quantity exceeded the limit set in Department
ID Management.
Remedy : Contact your system manager.