User`s guide

Finisher-F1/Saddle Finisher-F2/Puncher Unit-B1
7-11
7
Optional Equipment
Finishing Functions
The Finisher is equipped with the following functions.
NOTE
The tray moves down when each set of paper is delivered. When the delivered paper
reaches the stacking limit of the tray, the paper is automatically delivered to another
suitable tray. When the paper reaches the stacking limit of all of the suitable trays, printing
stops temporarily. After you remove the delivered paper from the tray, the tray moves up
the corresponding distance and printing of the remaining sets resumes.
■ Collate Mode
This function automatically collates print sets into page order before they are delivered.
■ Group Mode
This function outputs all prints of the same page in one set and slightly shifts the output
position of the other print sets to make them easier to handle.
■ Offset Mode
This function outputs papers by shifting them to the front.
IMPORTANT
You cannot set the Offset mode when printing on STMTR-size paper.
NOTE
When the Collate or Group functions are set or prints are output from a computer, the
output papers are shifted about 1 1/4" (30 mm) before delivery.
aa
aa
Upper Cover
Open to remove jammed paper.
bb
bb
Top Cover of the Puncher Unit
Open this cover when a paper jam occurs in the
puncher unit.
cc
cc
Front Cover of the Puncher Unit
Open this cover when a paper jam occurs in the
puncher unit, or when removing punch waste.
dd
dd
Upper Front Cover
Open this cover to replace the staple case in the
staple unit, or when a staple jam occurs.
ee
ee
Lower Front Cover
Open this cover when a paper jam or staple jam
occurs in the saddle stitcher unit, or when
replacing the saddle stitcher unit’s staple
cartridge.
* Only available with the Saddle Finisher-F2.
ff
ff
Booklet Tray
The paper that is folded and stapled at the center
to form a booklet is delivered to this tray.
* Only available with the Saddle Finisher-F2.
gg
gg
Output Tray B
Papers are output to these trays. Assign
specified functions to output to a designated tray.
hh
hh
Output Tray A