User`s guide

Finisher-F1/Saddle Finisher-F2/Puncher Unit-B1
7-14
Optional Equipment
7
■ Hole Punch Mode
This function punches holes (2 or 3 holes) in the printed sheets.
• The hole punched area is as shown in the illustration.
• The distance between the punched holes is as shown in the illustration.
IMPORTANT
• The machine automatically selects the type of hole punch (2 or 3 holes) depending on
the selected paper size.
- 2 holes: LGL, LTRR
- 3 holes: 11" x 17", LTR
• You cannot punch holes in STMTR-size paper.
• Holes cannot be punched in transparencies, tracing paper, labels, and 3-hole punch
paper.
• This function is only available when the Finisher is equipped with the Puncher Unit-B1.
ABC
ABC
V
ABC
V
ABC
Platen Glass Feeder
Hole
Punched
Area
Hole
Punched
Area
Hole
Punched
Area
Hole
Punched
Area
4 1/4"
(108 mm)
4 1/4"
(108 mm)
3 holes
2 3/4"
(70 mm)
2 holes