User`s guide

Finisher-F1/Saddle Finisher-F2/Puncher Unit-B1
7-26
Optional Equipment
7
CAUTION
• When removing jammed originals or paper, take care not to cut your hands on
the edges of the originals or paper.
• When removing jammed paper or when inspecting the inside of the machine, do
not allow necklaces, bracelets, or other metal objects to touch the inside of the
machine, as this may result in burns or electrical shock.
• When removing jammed paper, take care not to allow the toner to come into
contact with your hands or clothing, as this will dirty your hands or clothing. If
they become dirty, wash them immediately with cold water. Washing them with
warm water will set the toner, and make it impossible to remove the toner stains.
• When removing paper which has become jammed inside the machine, remove
the jammed paper gently to prevent the toner on the paper from scattering and
getting your eyes or mouth. If toner gets your eyes or mouth, wash them
immediately with cold water and immediately consult a physician.
NOTE
This procedure is only required when the Saddle Finisher-F2 is attached to the machine.
1 Move the Saddle Finisher-F2 away from the main unit. Hold
the section indicated in the figure.
2 Remove the jammed paper.