User`s guide

Finisher-F1/Saddle Finisher-F2/Puncher Unit-B1
7-29
7
Optional Equipment
9 Continue to follow the instructions on the touch panel
display.
NOTE
The screen indicating how to remove the paper jam will remain displayed until the
paper jam has been cleared. (See “Screen Shown When There Is a Paper Jam,” on
p. 6-2.)
Replacing the Saddle Stitcher Unit’s Staple Cartridge
When the finisher runs out of staples, the staple cartridge must be replaced. A
screen similar to the one shown below appears on the touch panel display. Follow
the procedure described below to replace the staple cartridge.
IMPORTANT
Before replacing the staple cartridge, remove all output sheets from the booklet tray.
NOTE
This procedure is only required when the Saddle Finisher-F2 is attached to the machine.