User`s guide

Main Power and Control Panel Power
1-34
1
Before You Start Using This Machine
NOTE
• The Standard mode is set on the touch panel display.
• The standard copy settings are:
- Copy ratio: Direct (100%)
- Paper selection: Auto Paper Selection
- Copy exposure: Auto Exposure Control
- Copy quantity: 1
- Copy function: 1 ➞ 1-sided copy
• You can change the standard settings. (See Chapter 3, “Customizing Settings,” in
the Copying Guide, Chapter 5, “Customizing Settings,” in the Mail Box Guide, or
Chapter 3, “Setting/Storing the Communications Settings,” in the Sending Guide.)
• You can select which functions to display on the Basic Features screen when
turning ON the main power, according to the Additional Functions settings. (See
“Selecting the Initial Function at Power ON,” on p. 3-8.)
• When the machine becomes ready to scan, jobs can be reserved. (See Chapter 1,
“Basic Copying,” in the Copying Guide, Chapter 4, “Using/Arranging Documents
Stored in an Inbox,” in the Mail Box Guide, or Chapter 1, “Various Sending
Methods,” in the Sending Guide.)
• If you press [➞] right after the machine is activated, the screen will not change.
Wait for a moment, then press [➞] again.
● If login authentication by a login service is not set, and MEAP is
selected as the initial function in Common Settings from the
Additional Functions screen:
❑ The Start Up screen is displayed until the machine is ready to scan.