Getting Started Guide

Replacing the Toner Cartridge/Waste Toner Container 49
Detach the cap mounted on the side 06
of the container, and use it to seal the
opening so that the waste toner does
not spill out.
Unlock the drum unit by turning the 07
drum unit lock lever
counterclockwise until it stops.
*
*: Drum Unit Lock Lever
While lifting the lever under the tab, 08
slowly pull the drum unit until the
blue marking appears.
*
*: Blue Marking
Holding the part with the blue 09
marking, pull the drum unit out
slightly upward.
Remove the drum unit from its 10
protective bag.
Do not touch or expose the cylindrical, blue-green •
part to light for a long time, as the print quality
may deteriorate.
Do not expose the drum unit to direct sunlight or •
strong light.
Condensation (water droplets on the inside or •
outside) may form on the drum unit when it is
brought into an environment with a sudden
change in temperature or humidity. When moving
a new drum unit to a location with change in
temperature, leave the drum unit in the protective
bag at the new location for two or more hours to
allow it to adjust to the new temperature.