Quick Setup Guide

9
You can check the status of jobs being executed or a log of jobs that have been
executed from the Status Monitor/Cancel screen. On this screen, you can change the
priority of jobs and set a destination from the past send history. You can also check the
status of consumables.
Register Destination (for Send Log)
■
If you select a destination in the send history and
press [Register Destination], you can register that
destination to the address book.
Check I-Fax RX (for Receive Jobs/Log)
■
Enables you to check whether any new I-faxes have
been received.
Operations that can be performed on jobs being executed or the job history
Job Status
The status of jobs being executed or the job history can be checked with the following icons.
Job Types
Checking the status of
consumables
Press [Consumables] to display the
status of consumables such as paper
and toner.
A
B
C
A
Remaining amount of
toner
OK: 100% to 11%
Low: 10% to 1%
Empty: 0%
B
Amount of waste toner
OK: 0% to 79%
Near Full: 80% to 99%
Full: 100%
C
Remaining amount of
staples
OK: 100% to 26%
Low: 25% to 1%
Empty: 0%
Executing Paused/Need Paper
Waiting Secure Print
Interrupt/
Priority Printing
Encrypted Secure Print
Sent
Error Before Output
Canceling After Output
Copy Job Send Job
Print Job Received Job
Send Job Network Job
Fax Job Memory Media Job
I-Fax Job Report Print Job