Guide for Mac
Table Of Contents
- Preface
- How To Use This Manual
- Legal Notices
- Product Name
- FCC (Federal Communications Commission)
- Laser Safety
- International ENERGY STAR Program
- IPv6 Ready Logo
- Information Security Standard (IEEE 2600)
- Copyright
- Third Party Software
- The Software Subjected to Other Conditions
- Disclaimers
- Legal Limitations on the Usage of Your Product and the Use of Images
- Users in the U.S.A.
- Users in Canada
- Utilisation au Canada
- Super G3
- Important Safety Instructions
- Installation Location and Handling
- Backing Up/Exporting Data
- Parts and Their Functions
- Main Power and Energy Saver Key
- Specifications
- Main Unit
- Feeder (DADF-AG1)
- Cassette Feeding Unit-AF1
- Envelope Feeder Attachment-D1
- Paper Deck Unit-B2
- Staple Finisher-G1
- Booklet Finisher-G1
- External 2/3 Hole Puncher-B2
- Inner Finisher-D1
- Inner Finisher Additional Tray-A1
- Inner 2/3 Hole Puncher-A1
- Inner 2Way Tray-H1
- Copy Card Reader-F1
- Super G3 FAX Board-AP1
- Send Function
- Network Environment
- Printer Settings
- CANON imageRUNNER ADVANCE 4251/4245/4235/4225 SERIES LIMITED
- TERMS OF imageWARE REMOTE SERVICE
- TERMS OF Content Delivery System
22
Installation Location and
Handling
This section describes precautions for installation location and handling. We recommend that you read this section prior to
using this machine.
Installation Precautions
Avoid Installing the Machine in the Following Locations
● Avoid locations subject to temperature and
humidity extremes, whether low or high.
For example, avoid installing the machine near water faucets, hot
water heaters, humidi ers, air conditioners, heaters, or stoves.
● Avoid installing the machine in direct sunlight.
If this is unavoidable, use curtains to shade the machine. Be sure
that the curtains do not block the machine's ventilation slots or
louvers, or interfere with the electrical cord or power supply.
● Avoid poorly ventilated locations.
This machine generates a slight amount of ozone etc. during
normal use. Although sensitivity to ozone etc. may vary, this
amount is not harmful. Ozone etc. may be more noticeable
during extended use or long production runs, especially in
poorly ventilated rooms. It is recommended that the room be
appropriately ventilated, su cient to maintain a comfortable
working environment, in areas of machine operation.
● Avoid locations where a considerable amount of
dust accumulates.
● Avoid locations where ammonia gas is emitted.
● Avoid locations near volatile or ammable
materials, such as alcohol or paint thinner.