Guide for Mac
Table Of Contents
- Preface
- How To Use This Manual
- Legal Notices
- Product Name
- FCC (Federal Communications Commission)
- Laser Safety
- International ENERGY STAR Program
- IPv6 Ready Logo
- Information Security Standard (IEEE 2600)
- Copyright
- Third Party Software
- The Software Subjected to Other Conditions
- Disclaimers
- Legal Limitations on the Usage of Your Product and the Use of Images
- Users in the U.S.A.
- Users in Canada
- Utilisation au Canada
- Super G3
- Important Safety Instructions
- Installation Location and Handling
- Backing Up/Exporting Data
- Parts and Their Functions
- Main Power and Energy Saver Key
- Specifications
- Main Unit
- Feeder (DADF-AG1)
- Cassette Feeding Unit-AF1
- Envelope Feeder Attachment-D1
- Paper Deck Unit-B2
- Staple Finisher-G1
- Booklet Finisher-G1
- External 2/3 Hole Puncher-B2
- Inner Finisher-D1
- Inner Finisher Additional Tray-A1
- Inner 2/3 Hole Puncher-A1
- Inner 2Way Tray-H1
- Copy Card Reader-F1
- Super G3 FAX Board-AP1
- Send Function
- Network Environment
- Printer Settings
- CANON imageRUNNER ADVANCE 4251/4245/4235/4225 SERIES LIMITED
- TERMS OF imageWARE REMOTE SERVICE
- TERMS OF Content Delivery System
27
● This machine generates a slight amount of ozone
etc. during normal use. Although sensitivity to
ozone etc. may vary, this amount is not harmful.
Ozone etc. may be more noticeable during
extended use or long production runs, especially
in poorly ventilated rooms. It is recommended that
the room be appropriately ventilated, su cient to
maintain a comfortable working environment, in
areas of machine operation.
● For safety reasons, press
(Energy Saver) when
it will not be used for a long period of time, such
as overnight. As an added safety measure, turn
OFF the main power switch, and disconnect the
power cord when the machine will not be used
for an extended period of time, such as during
consecutive holidays.
● Use a modular cable that is shorter than 9’ 10” (3
meters).
● Use a USB cable that is shorter than 9’ 10” (3
meters).
● Paper that has just been output from the machine
may be hot. Be careful when removing or aligning
paper from the output tray. Touching paper right
after it is output may result in low-temperature
burns.