Guide for Mac
Table Of Contents
- Preface
- How To Use This Manual
- Legal Notices
- Product Name
- FCC (Federal Communications Commission)
- Laser Safety
- International ENERGY STAR Program
- IPv6 Ready Logo
- Information Security Standard (IEEE 2600)
- Copyright
- Third Party Software
- The Software Subjected to Other Conditions
- Disclaimers
- Legal Limitations on the Usage of Your Product and the Use of Images
- Users in the U.S.A.
- Users in Canada
- Utilisation au Canada
- Super G3
- Important Safety Instructions
- Installation Location and Handling
- Backing Up/Exporting Data
- Parts and Their Functions
- Main Power and Energy Saver Key
- Specifications
- Main Unit
- Feeder (DADF-AG1)
- Cassette Feeding Unit-AF1
- Envelope Feeder Attachment-D1
- Paper Deck Unit-B2
- Staple Finisher-G1
- Booklet Finisher-G1
- External 2/3 Hole Puncher-B2
- Inner Finisher-D1
- Inner Finisher Additional Tray-A1
- Inner 2/3 Hole Puncher-A1
- Inner 2Way Tray-H1
- Copy Card Reader-F1
- Super G3 FAX Board-AP1
- Send Function
- Network Environment
- Printer Settings
- CANON imageRUNNER ADVANCE 4251/4245/4235/4225 SERIES LIMITED
- TERMS OF imageWARE REMOTE SERVICE
- TERMS OF Content Delivery System
36
Energy Saver Key
If the machine is idle for a certain period of time, the machine will enter the Auto Sleep mode to minimize energy consumption.
Press
(Energy Saver) to cancel the Sleep mode and resume normal machine operations.
Shutting Down the Machine
This machine performs a procedure to protect the hard disk when the machine is shut down.
This enables the machine to be shut down safely, even if there are any jobs being processed, or a MEAP application is running
while the machine is shutting down.
1
Turn OFF the main power.
1
2
3
1
2
3
( )
1. Open the main power switch cover.
2. Press the main power switch to the
“ ” side.
3. Close the main power switch cover.
IMPORTANT
• Do not turn the main power OFF while using the Fax/IP Fax/I-Fax function. Sending or receiving I-fax or
fax documents cannot be done when the main power is turned OFF.
• If the message <Backing up stored data from the Remote UI...> is displayed on the touch panel display,
do not turn the main power OFF. This may cause the machine cannot back up the stored data.
• Data stored in the machine may be damaged if the Advanced Box is accessed by another imageRUNNER
ADVANCE machine or a computer immediately before the machine shuts down.
• The machine may take some time to completely shutdown. Do not unplug the power cord until the
main power indicator of the machine is OFF.
• If the main power is turned OFF during scanning or printing, a paper jam may occur.
NOTE
If you set [Quick Startup Settings for Main Power] to ‘On’ in [Preferences] (Settings/Registration), the tone
sounds when turning OFF the main power of the machine. (Depending on the situations, the machine
does not startup quickly and the tone does not sound.)