Operation Guide

111
Troubleshooting
Main Unit
Check the location of the paper jam, and follow the procedure described below, while referring to the directions that appear on
the touch panel display, to remove the jammed paper.
• If the Paper Deck Unit-B2 is attached, move the paper deck unit away from the main unit before proceeding with this
procedure.
• If paper is loaded in the multi-purpose tray, remove the loaded paper.
• This section uses illustrations of the machine with the Inner Finisher-D1 attached.
1
Open the right cover of the machine.
2
1
1. Press the open button of the right
cover of the machine.
2. Open the right cover of the machine.
2
Remove any jammed paper protruding from the  rst output tray.
If you cannot remove the jammed
paper, remove it from below.
3
Remove any jammed paper protruding from the second output tray or reversing
unit.
2
1
1. Remove any jammed paper from the
second output tray.
2. Remove any jammed paper from the
reversing unit.