Operation Guide

• If a log in screen for Department ID Management or SSO-H appears, you must enter the applicable authentication information (ID, password/

PIN). If the Copy Card Reader-F1 is attached,  rst insert a control card.

• If a login service, such as Department ID Management or SSO-H has been set, press (Log In/Out) to log out.

• The send settings for the last send job may be retained.

- To cancel the settings, press (Reset).

- The speci ed destinations are not retained.

This section describes the  ow of basic scan and send operations.

Depending on the  le format, optional products are required to use the Scan function.

Sending Scanned Data (E-Mail/Fax/I-Fax/File Servers)

1 2

Selecting Function

Select [Scan and Send] from the Main Menu screen.

Press [Scan and Send].

Scan and Send Basic Features screen is displayed.

Placing Originals

Place the original on the feeder or the platen glass.

Placing originals in the feeder

Adjust the slide guides to  t the size of your originals. Neatly place

your originals with the side to be copied face up.

Placing originals on the platen glass

Open the feeder/platen cover.

Place your originals face down.

Gently close the feeder/platen cover.

You can set various send functions. For more

information, see from p. 38 to p. 41 in this manual.