Operation Guide

80
Replacing the Staple Cartridge
(For Optional Products)
When the  nisher is almost out of staples and the cartridge in the stapler unit must be replaced, a screen prompting you to
replace the staple cartridge appears on the touch panel display. Follow the procedure described below to replace the staple
cartridge.
• The Staple Finisher-G1, Booklet Finisher-G1, and Inner Finisher-D1 are optional products.
• We recommend that you order staple cartridges from your local authorized Canon dealer before your stock runs out.
Replacing the Staple Cartridge in the Stapler Unit
(Staple Finisher-G1/Booklet Finisher-G1)
Remove the orange seal that holds the staples together after you place the staple cartridge into the staple case.
Use only staple cartridges intended for use with this machine.
1
Open the front cover of the  nisher.
*2*1
*1 Booklet Finisher-G1
*2 Staple Finisher-G1