Operation Guide
83
Routine Maintenance
Replacing the Staple Case in the Saddle Stitcher Unit
(Booklet Finisher-G1)
If necessary, remove all output paper in the booklet tray before replacing the staple cartridge of the saddle stitcher unit.
• This procedure is necessary only if the Booklet Finisher-G1 is attached (the Booklet Finisher-G1 is an optional product).
• Use only staple cases intended for use with this machine.
• Remove the black part on the end before inserting the staple case.
1
Open the front cover of the nisher.