Operation Guide

84
2
Pull out the saddle stitcher unit, and then push the stapler unit up.
*2
*1
1. Grip the handle of the
saddle stitcher unit, and
pull out until it stops.
2. Pull the stapler unit of
the saddle stitcher unit
towards you, and then
push it up.
*1 Stapler Unit
*2 Saddle Stitcher Unit
3
Insert the new staple case.
1. Pull out the empty staple
case, holding it by its left
and right sides.
2. Push the new staple case
in until it clicks into place.
• Only one staple case can be inserted at a time.
• When replacing the staple cases, replace both the front and back staple cases.
4
Push the saddle stitcher unit back into its original position.
1. Pull the stapler unit of
the saddle stitcher unit
towards you, and then
push it down into its
original position.
2. Grip the handle of the
saddle stitcher unit, and
return it to its original
position.
When pushing the saddle stitcher unit back into its original position, be careful not to get your
 ngers caught, as this may result in personal injury.