Operation Guide
86
Replacing the Staple Cartridge (Inner Finisher-D1)
Use only staple cases intended for use with this machine.
1
Pull out the staple case from the nisher.
1. Open the front cover of the
nisher.
2. Lift and pull out the staple
case from the stapler unit,
holding it by the green tab.
2
Pull out the empty staple cartridge from the staple case.
PUSH
2
1
1
1. Press the areas indicated by
PUSH on both sides of the
staple case.
2. Once you have released the
spring-loaded case, pull out
the staple cartridge.